Cummins 375 KVA Generator Set
CCEC 375kva generator set Standard Configuration ● Engine（ Cummins NTA855-G7 ） ● Radiator 50°Cmax, fans are driven by belt, with safety guard ● 24V charge alternator ● Alternator: single bearing alternator IP23, insulation class H/H ● Absorber ● Dry type air filter, fuel filter, oil filter ●...
CCEC 375kva generator set
● Engine（Cummins NTA855-G7）
● Radiator 50°Cmax, fans are driven by belt, with safety guard
● 24V charge alternator
● Alternator: single bearing alternator IP23, insulation class H/H
● Dry type air filter, fuel filter, oil filter
● Main line circuit breaker
● Standard control panel
● Two12V batteries, rack and cable
● Ripple flex exhaust pipe, exhaust siphon, flange, muffler
● User manual
1. Basic parameter
In-line, 6 Cylinders, Four-stroke
Mode of Speed Regulation
2. Exhaust Air System
Exhaust air capacity
Exhaust air temperature
Max. exhaust back pressure
3. Air Intake System
Air Intake Type
Turbocharged, Air-Air cooling
Max. Air Intake Pressure
Air Combustion Capacity
4. Fuel System
209g/KW.h or 71 L/s (100% loading)
5. Lubrication System
≤4g/KW.h or ≤0.24 L/h
Oil Pan Capacity
Rated Speed Oil Pressure
241 - 345 kPa
6. Cooling System
Total Cooling Liquid Capacity
Thermostat Working Temperature
Max. Water Temperature
Number of Phase
3 Phase and 4 Wires, "Y" type connecting
Number of Bearing
Telephone Influence Factor (TIF)
Voltage Regulation, Stead State
Sudden Voltage Warp (100% Sudden Reduce)
Sudden Voltage Warp (Sudden Increase)
Voltage Stable Time (100% Sudden Reduce)
Voltage Stable Time (Sudden Increase)
Frequency Regulation, Stead State
Sudden Frequency Warp (100% Sudden Reduce)
Sudden Frequency Warp (Sudden Increase)
Frequency Recovery Time (100% Sudden Reduce)
Frequency Recovery Time (Sudden Increase)
1.Advanced fuel system enable direct injection, so as to efficiently lower fuel consumption while augmenting power.
2.PT fuel injection system offers you options: may use mechanical system or even better use CENTRY speed-regulation system by electric controlling.
3.Swaged forging crankshaft and connection bar make their life longer.
4.Four valves, supercharging, and air inter-cooling elevate discharge standard and increase power.
5.The compact design of four stroke and in-line has the size smaller and weight lighter.
6.Design of one valve outfitting with one cylinder lower the temperature of cylinder head efficiently , increase service life, and facilitate maintenance.
7.Hierarchical variable timing system (STC) allows engine to accelerate with load smoothly , to control fuel injection more accurately ,and to elevate discharge standard.